PGW 153e Precision Balance by Adam Equipment
| Technical Specifications | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Model | PGW 153e | ||||||||||||||||||
| Maximum capacity | 150g | ||||||||||||||||||
| Readability | 0.001g | ||||||||||||||||||
| Repeatability (S.D.) | 0.001g | ||||||||||||||||||
| Linearity (±) | 0.002g | ||||||||||||||||||
| Pan size | 140×140mm | ||||||||||||||||||
| General Specifications | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Tare range | Full | ||||||||||||||||||
| Units of measurement | Gram (g), Kilogram (kg), Milligram (mg), Carat (ct), Pound (lb), Ounce (Oz), Dram (d), Grain (GN), Troy Ounce (Ozt), Pennyweight (dWt), Momme (MM), Taels Hk. (TL.H), Taels S. (TL.S), Taels T. (TL.T), Tical (ti), Newton (N), Custom unit | ||||||||||||||||||
| Applications | Weighing, Net / total, Check weighing, Percentage weighing, Weight accumulation, Averaging, Parts counting, Animal / dynamic weighing, Density determination, Below balance weighing | ||||||||||||||||||
| Interface | Bi-directional RS-232 (Standard) | ||||||||||||||||||
| Calibration | Internal or External, Selectable automatic calibration due to change in time or temperature | ||||||||||||||||||
| Display | Backlit LCD with dual digits (24 mm high) and capacity tracker | ||||||||||||||||||
| Power supply | 15 VDC, 50/60 Hz, 800 mA (Input Voltage 100-240 V, 50/60 Hz) | ||||||||||||||||||
| Operating temperature | 10°C - 40°C | ||||||||||||||||||
| Housing | Die cast aluminium housing (glass weighing chamber for models with 1mg readability) | ||||||||||||||||||
| Draught shield | Supplied as standard on models with 1mg readability | ||||||||||||||||||
| Draught shield dimensions | 158x158x80mm | ||||||||||||||||||
| Overall dimensions (wxdxh) | 251×358×104mm | ||||||||||||||||||
| Net weight | 5.5kg | ||||||||||||||||||
 |
 |
 |
 |
 |
 |
 |
For more bespoke or specialist Vial Crimping and Decapping
applications, please contact us at enquiries@crimpers-and-decappers.com or at the address below:
30
Lanchester Way,
Royal Oak Industrial Estate,
Daventry,
Northamptonshire
NN11 8PH.
United Kingdom
Tel. +44 1327 877774 Fax. +44 1327 877444
For any other enquiries, you can send mail to sales@crimpers-and-decappers.com
